 |
Wilson Student Team Project Center |
 |
Items in Machine Shop
Items in Assembly Area
Items on Second Floor
Items stored in the "Bone Yard"
Items in Machine Shop
- Bridgeport Mill Series I (qty 2) [image]
- 9" X 48" Table
- 36" Table Travel X-Axis
- 12" Saddle Travel Y-Axis
- 5" Quill Travel
- 16" Knee Travel Z-Axis
- 60-4200 RPM Variable Speed
- Accu-Rite 2-Axis DRO 200M
- Bridgeport CNC Mill [image]
- 9" X 48" Table
- Prototrak M3 CNC Control
- Tormax Romi Lathe (qty 2) [image]
- Accu-Rite DRO S200
- Sport CNC Lathe [image]
- Prototrak L2 Control
- Dake Horizontal Bandsaw
- 10" Rd. Capacity
- Hydraulic Control
- Rusch Machine & Design, Inc. Abrasive Belt Tube and Pipe Notcher Model #900
- 0.75", 1", & 1.5" Mandrels
- Wilton 20" Disc Sander
- Tiltable table (45º to the right and 15º to the left)
- 3HP, 1720 RPM
- Clausing Cold Cut Saw
- 14" Blade
- 4 3/4 Tube Capacity
- Clausing 20" Variable Speed Drill Press
- 55 Ton Capacity Hydraulic Press
- GMAW Welders (Miller Deltaweld 300, Miller Invision 354MP)
- GTAW Welders (Miller Dynasty DX 300, Miller Dynasty 350, Miller Tigrunner 250)
- Plasma Cutter (Miller Spectrum 2050)
- Oxy/Acetylene Torch
Items in Assembly Area
- Trade Master 20" Vertical Band Saw
- Delta 12" Bench Drill Press (Model DP300) (in Team Area)
- Tennsmith Heavy Duty Hand Brake
- 12 Gauge Capacity
- 48" Length
- 2", 3", 4" Finger Widths
- Tennsmith Squaring Shear
- 16 Gauge Capacity
- 37" Length
- Tennsmith Slip Roll
- 20 Gauge Capacity
- 24" Length
- 3/16, 1/4, 5/16 Wire Groove
- Tennsmith Notcher
- 16 Gauge Capacity
- Walker-Gerver Sheet Metal Punch
- 1/16" to 1/2" punches and dies by 64ths
- 7/32" to 1" punches and dies by 32nds
- 1 1/4" Punch and Die
- 1 3/8" Punch and Die
- 1 1/2" Punch and Die
- 1/2 Square Punch and Die
- Trinco 36 x 24 x 23 Sandblaster
- Oven
- Parts Washer
- Dake Arbor Press
- Paint Booth
Items on Second Floor
- Shop Bot PRSstandard CNC Router
- 48" X 48" X 6" Nominal Cutting Area
Items stored in the "Bone Yard"
- Various Sand Paper
- Various Team Supplies