PAPERS AND PRESENTATIONS

 

 

Publications:

 

 

  1. J. T. Busby, M. C. Hash, and G. S. Was, “The Relationship Between Hardness and Yield Stress in Irradiated Austenitic and Ferritic Steels,” J. of Nucl. Mater., in press, 2004.

 

  1. J. T. Busby and G. S. Was, “Irradiation Assisted Stress Corrosion Cracking in Model Austenitic Alloys with Solute Additions,” Proc. 11th Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 995-1014 (2004).

 

  1. J. T. Busby, E.A. Kenik, and G. S. Was, “Effect of Single Solute Additions on Radiation-Induced Segregation of Model Austenitic Alloys,” Phil Mag. A., in press, 2004.

 

  1. J. T. Busby, M. M. Sowa, G. S. Was, and E. P. Simonen, “Post-Irradiation Annealing of Small Defect Clusters,” Phil Mag. A., in press, 2004.

 

  1. J. T. Busby, M. M. Sowa and G. S. Was, “The Role of Fine Defect Clusters in Irradiation-Assisted Stress Corrosion Cracking of Proton-Irradiated 304 Stainless Steel,” Effects of Radiation on Materials: 21st International Symposium, ASTM STP, M. L. Grossbeck, T. R. Allen, R. G. Lott and A. S. Kumar, eds., American Society for Testing and Materials, West Conshohocken, PA, 78-91 (2004).

 

  1. J. I. Cole, T. R. Allen, G. S. Was and E. A. Kenik, “The Influence of Pre-irradiation Heat Treatments on Thermal Non-Equilibrium and Radiation-Induced Segregation Behavior in Model Austenitic Stainless Steel Alloys,” Effects of Radiation on Materials: 21st International Symposium, ASTM STP, M. L. Grossbeck, T. R. Allen, R. G. Lott and A. S. Kumar, eds., American Society for Testing and Materials, West Conshohocken, PA, 540-552 (2004).

 

  1. R. B. Dropek, G. S. Was, J. Gan, J. I. Cole, T. R. Allen and E. A. Kenik, “Bulk Composition and Grain Boundary Engineering to Improve Stress Corrosion Cracking Behavior of Proton Irradiated Stainless Steels,” Proc.11th  Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 1132-1141 (2004).

 

  1. J. Gan, E. P. Simonen and S. M. Bruemmer, L. Fournier, B. H. Sencer, and G. S. Was, “The Effect of Oversized Solute Additions on the Microstructure of 316SS Irradiated with 5 MeV Ni++ Ions or 3.2 MeV Protons,” J. Nucl. Mater., 325,  94-106 (2004).

 

  1. M. C. Hash, L. M. Wang, J. T. Busby and G. S. Was, “The Effect of Hardening Source in Proton Irradiation-Assisted Stress Corrosion Cracking of Cold-Worked Type 304 Stainless Steel,” Effects of Radiation on Materials: 21st International Symposium, ASTM STP, M. L. Grossbeck, T. R. Allen, R. G. Lott and A. S. Kumar, eds., American Society for Testing and Materials, West Conshohocken, PA, 92-104 (2004).

 

  1. Y. Isobe, M. Sagisaka, B. H. Sencer, G. S. Was, F.A. Garner, H. Yuya, A. Nishikawa, and Y. Sugita, “Proton-Induced Relaxation of Surface Stresses Resulting from Heavily Cold-Worked 304 Stainless Steels,” Proc. 11th Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 930-939 (2004).

 

  1. M. Reason, W. Ye, X. Weng, G. Obeidi, V. Rotberg, and R. S. Goldman, “Stress Evolution in GaAsN Films Grown by Reactive Molecular Beam Epitaxy,” Proc. of the National Center for Photovoltaics and Solar Program Review Meeting (2003).

 

  1. M. Reason, H. McKay, W. Ye, S. Hanson, V. Rotberg, and R. S. Goldman, “Mechanisms of Nitrogen Incorporation in GaAsN Alloys,” Appl. Phys. Lett, 85, 1692 (2004).

 

  1. B. H. Sencer, G. S. Was, F. A. Garner, G. M. Bond, M. Sagisaka, and Y. Isobe, “Proton-Induced Microstructural Evolution of Solution Annealed 304 and Cold-Worked 316 Stainless Steels Irradiated at 300 and 340oC,” Proc. 11th Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 665-674 (2004).

 

  1. B. H. Sencer, G. S. Was, L. Fournier, E. Kenik, and S. Bruemmer, “Influence of Oversized Solute Additions on Radiation-Induced Microstructure and Microchemistry in Austenitic Stainless Steel,” Effects of Radiation on Materials: 21st International Symposium, ASTM STP, M. L. Grossbeck, T. R. Allen, R. G. Lott and A. S. Kumar, eds., American Society for Testing and Materials, West Conshohocken, PA, 46-55 (2004).

 

  1. E. P. Simonen, D. J. Edwards, B. W. Arey, S. M. Bruemmer, J. T. Busby and G. S. Was,”Annealing Stages in Neutron-Irradiated Austenitic Stainless Steels,” Phil Mag. A., in press, 2004.

 

  1. S. Teysseyre, J. McKinley, and G. S. Was, D. B. Mitton, H. Kim, J-K Kim and R. M. Latanision, “Corrosion and Stress Corrosion Cracking of Austenitic Alloys in Supercritical Water,” Proc. 11th Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 63-72 (2004).

 

  1. G. S. Was, B. Alexandreanu, P. Andresen, M. Kumar, “Role of Coincident Site Lattice Boundaries in Creep, Corrosion and Stress Corrosion Cracking,” Proc. Materials Research Society, Materials Research Society, Warrendale, PA, 87-100 (2004).

 

  1. G. S. Was, B. Alexandreanu, and J. Busby, “Localized Deformation-Induced IGSCC and IASCC of Austenitic Alloys in High Temperature Water,” Advances in Fracture and Failure Prevention, Trans Tech Publications, Ltd, Switzerland, 885-902 (2004).

 

  1. G. S. Was, J. T. Busby, T. R. Allen, J. Gan, “Assessment of Materials for Accelerator Applications using Proton Irradiation,” Proc. Sixth Int’l Meeting on Nuclear Applications of Accelerator Technology (AccApp’03), American Nuclear Society, La Grange Park, IL, 864-873 (2004).

 

  1. G. S. Was, “Recent Developments in Understanding Irradiation Assisted Stress Corrosion Cracking,” Proc. 11th Int’l Conf. Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, American Nuclear Society, La Grange Park, IL, 965-985 (2004). INVITED

 

  1. X. Weng, W. Ye, R. S. Goldman, and J. C. Mabon, “Formation and Blistering of GaAsN Nanostructure Layers, J. Vac. Sci. Technol., 22, 989 (2004).

 

  1. X. Weng, R. S. Goldman, V. Rotberg, N. Bataiev, and L. J. Brillson, “Origins of Luminescence from Nitrogen Ion Implanted Epi-GaAs,” Appl. Phys. Lett., 85, 2774 (2004).

 

  1. X. Weng, W. Ye, S. Clarke, A. Daniel, V. Rotberg, R. Clarke, and R. S. Goldman, “Matrix Seeded Growth of Semiconductor Nanostructures Using Ion Beams,” J. Appl. Phys., in press.
  2. X. T. Zu, K. Sun, M. Atzmon, L. M. Wang, L. P. You, F. R. Wan, J. T. Busby, G. S. Was, and R. B. Adamson, “Effect of Proton and Ne Irradiation on the Microstructure of Zircaloy 4, ” Phil Mag. A., in press, 2004.

 

  1. X. T. Zu, L. M. Wang, M. Atzmon, G. S. Was and R. B. Adamson, “Effect of Proton Irradiation on Microstructure and Hardness Evolution in Zircaloy 4,” Effects of Radiation on Materials: 21st International Symposium, ASTM STP, M. L. Grossbeck, T. R. Allen, R. G. Lott and A. S. Kumar, eds., American Society for Testing and Materials, West Conshohocken, PA, 741-752  (2004).

 

 

 

 


 


 

Presentations:

 

 

  1. J. T. Busby and G. S. Was, “Influence of Stacking Fault Energy and Deformation Mode on IASCC,”  presented at Effects of Radiation on Materials: 22nd International Symposium, ASTM, Boston, MA, 2004.

 

  1. R. S. Goldman, “Nanometer-Scale Structure and Properties of Dilute Semiconductor Alloys”, Condensed Matter Physics Seminar, Ohio State University, January 5, 2004.

 

  1. R. S. Goldman, “Ion-Cut-Synthesis of GaAsN Nanostructures,” Seminar, Soitec, Bernin, France, May 28, 2004.

 

  1. R. S. Goldman, “Nanometer-Scale Structure and Properties of Dilute Semiconductor Alloys,” 2004 Nano and Giga Challenges in Microelectronics Meeting, Crakow, Poland, September 13-17, 2004.

 

  1. R. S. Goldman, “Nanometer-Scale Structure and Properties of Dilute Semiconductor Alloys,” Materials Colloquium, University of California-Santa Barbara, November 12, 2004.