Model {
  Name			  "system_model"
  Version		  3.00
  SimParamPage		  "Solver"
  SampleTimeColors	  off
  InvariantConstants	  off
  WideVectorLines	  off
  ShowLineWidths	  off
  ShowPortDataTypes	  off
  StartTime		  "0.0"
  StopTime		  "4.0"
  SolverMode		  "Auto"
  Solver		  "ode5"
  RelTol		  "1e-3"
  AbsTol		  "auto"
  Refine		  "1"
  MaxStep		  "auto"
  InitialStep		  "auto"
  FixedStep		  "0.01"
  MaxOrder		  5
  OutputOption		  "RefineOutputTimes"
  OutputTimes		  "[]"
  LoadExternalInput	  off
  ExternalInput		  "[t, u]"
  SaveTime		  on
  TimeSaveName		  "tout"
  SaveState		  off
  StateSaveName		  "xout"
  SaveOutput		  on
  OutputSaveName	  "yout"
  LoadInitialState	  off
  InitialState		  "xInitial"
  SaveFinalState	  off
  FinalStateName	  "xFinal"
  SaveFormat		  "Matrix"
  LimitMaxRows		  off
  MaxRows		  "1000"
  Decimation		  "1"
  AlgebraicLoopMsg	  "warning"
  MinStepSizeMsg	  "warning"
  UnconnectedInputMsg	  "warning"
  UnconnectedOutputMsg	  "warning"
  UnconnectedLineMsg	  "warning"
  InheritedTsInSrcMsg	  "warning"
  IntegerOverflowMsg	  "warning"
  UnnecessaryDatatypeConvMsg "none"
  Int32ToFloatConvMsg	  "warning"
  SignalLabelMismatchMsg  "none"
  ConsistencyChecking	  "off"
  ZeroCross		  on
  SimulationMode	  "normal"
  BlockDataTips		  on
  BlockParametersDataTip  on
  BlockAttributesDataTip  off
  BlockPortWidthsDataTip  off
  BlockDescriptionStringDataTip	off
  BlockMaskParametersDataTip off
  ToolBar		  on
  StatusBar		  on
  BrowserShowLibraryLinks off
  BrowserLookUnderMasks	  off
  OptimizeBlockIOStorage  on
  BufferReuse		  on
  BooleanDataType	  off
  RTWSystemTargetFile	  "grt.tlc"
  RTWInlineParameters	  off
  RTWRetainRTWFile	  off
  RTWTemplateMakefile	  "grt_default_tmf"
  RTWMakeCommand	  "make_rtw"
  RTWGenerateCodeOnly	  off
  ExtModeMexFile	  "ext_comm"
  ExtModeBatchMode	  off
  ExtModeTrigType	  "manual"
  ExtModeTrigMode	  "oneshot"
  ExtModeTrigPort	  "1"
  ExtModeTrigElement	  "any"
  ExtModeTrigDuration	  1000
  ExtModeTrigHoldOff	  0
  ExtModeTrigDelay	  0
  ExtModeTrigDirection	  "rising"
  ExtModeTrigLevel	  0
  ExtModeArchiveMode	  "off"
  ExtModeAutoIncOneShot	  off
  ExtModeIncDirWhenArm	  off
  ExtModeAddSuffixToVar	  off
  ExtModeWriteAllDataToWs off
  ExtModeArmWhenConnect	  off
  Created		  "Thu May 25 22:36:19 2000"
  UpdateHistory		  "UpdateHistoryNever"
  ModifiedByFormat	  "%<Auto>"
  LastModifiedBy	  "rmajkrza"
  ModifiedDateFormat	  "%<Auto>"
  LastModifiedDate	  "Fri Jun 09 14:42:10 2000"
  ModelVersionFormat	  "1.%<AutoIncrement:20>"
  ConfigurationManager	  "none"
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  LineDefaults {
    FontName		    "Helvetica"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "system_model"
    Location		    [251, 227, 642, 319]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "automatic"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "usletter"
    PaperUnits		    "inches"
    ZoomFactor		    "100"
    AutoZoom		    on
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      SubSystem
      Name		      "Propeller-Shaft"
      Ports		      [1, 1, 0, 0, 0]
      Position		      [140, 18, 215, 52]
      ShowPortLabels	      on
      MaskType		      "Propeller-shaft System"
      MaskDescription	      "This block takes as input the torque applied to"
" the shaft, T (in units of N-m), and outputs the angular velocity of the prop"
"eller-shaft system, Omega (in units of RPM)."
      MaskIconFrame	      on
      MaskIconOpaque	      on
      MaskIconRotate	      "none"
      MaskIconUnits	      "autoscale"
      System {
	Name			"Propeller-Shaft"
	Location		[97, 292, 707, 527]
	Open			on
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"usletter"
	PaperUnits		"inches"
	ZoomFactor		"100"
	AutoZoom		on
	Block {
	  BlockType		  Inport
	  Name			  "T"
	  Position		  [25, 68, 55, 82]
	  Port			  "1"
	  PortWidth		  "-1"
	  SampleTime		  "-1"
	  DataType		  "auto"
	  SignalType		  "auto"
	  Interpolate		  on
	  Port {
	    PortNumber		    1
	    Name		    "T-input"
	    TestPoint		    off
	    RTWStorageClass	    "Auto"
	  }
	}
	Block {
	  BlockType		  TransferFcn
	  Name			  "Transfer Fcn"
	  Position		  [125, 44, 270, 106]
	  Numerator		  "[5156.25]"
	  Denominator		  "[1 11.65 1016.5 1650]"
	}
	Block {
	  BlockType		  Outport
	  Name			  "Omega"
	  Position		  [540, 68, 570, 82]
	  Port			  "1"
	  OutputWhenDisabled	  "held"
	  InitialOutput		  "[]"
	}
	Line {
	  Name			  "T-input"
	  Labels		  [0, 1]
	  SrcBlock		  "T"
	  SrcPort		  1
	  DstBlock		  "Transfer Fcn"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Transfer Fcn"
	  SrcPort		  1
	  DstBlock		  "Omega"
	  DstPort		  1
	}
	Annotation {
	  Position		  [333, 66]
	  Text			  "Actual Engine RPM"
	}
	Annotation {
	  Position		  [473, 69]
	  Text			  "Measured Engine RPM"
	}
      }
    }
    Line {
      Name		      "T (N-m)"
      Labels		      [1, 0]
      Points		      [75, 35]
      DstBlock		      "Propeller-Shaft"
      DstPort		      1
    }
    Line {
      SrcBlock		      "Propeller-Shaft"
      SrcPort		      1
      Points		      [85, 0]
    }
    Annotation {
      Position		      [261, 30]
      Text		      "Omega (RPM)"
    }
  }
}